Technical Specifications Breakdown
Key parameters for the 330103-00-04-05-02-CN are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | M10 x 1 |
| Unthreaded Length | 0 mm |
| Overall Case Length | 40 mm |
| Total Length | 0.5 meter (1.6 feet) |
| Connector | Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval | Country Specific Approval (CN) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Operating Temperature (Standard Probe) | -52°C to +177°C (-62°F to +350°F) |
| Extended Temperature Range (Tip) | -52°C to +218°C (-62°F to +425°F) |
| Extended Temperature Range (Cable) | -51°C to +260°C (-60°F to +500°F) |
Industry Applications
Its wide temperature range and robust stainless steel case make it suitable for steam turbines and high-temperature processes. The PPS tip provides chemical resistance in oil and gas environments.
Installation & Setup Guidance
For optimal performance, mount the probe with the recommended gap setting of -9 Vdc (approximately 1.25 mm from target). Use 3-conductor shielded triad cable with tinned field wiring, 0.2 to 1.5 mm² (16 to 24 AWG). Maximum field wiring length between the Proximitor Sensor and monitor is 305 meters (1,000 feet). Ensure the M10 x 1 thread engages no more than 15 mm.
Maintenance & Reliability
Regularly inspect the probe cable and connector for damage. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The probe withstands 93% humidity with less than 3% change in Average Scale Factor (ASF) per IEC 68-2-3.
Are you struggling with reliable vibration monitoring in harsh industrial environments?
Accurate proximity sensing is critical for protecting rotating machinery from catastrophic failure. The Bently Nevada 330103-00-04-05-02-CN is a precision-engineered 3300 XL 8 mm Proximity Probe designed to deliver consistent, high-integrity measurements in demanding applications.
Compatibility & Integration
This 3300 XL probe is designed for use with Bently Nevada Proximitor Sensors and monitoring systems. For intrinsically safe installations, use zener barriers per drawing 141092 or galvanic isolators. For non-incendive circuits, connect per drawing 140979.
Selection Guide & Purchasing Advice
When selecting a replacement, verify the required unthreaded length, overall case length, and total length. The 330103-00-04-05-02-CN offers a 0.5 m cable with ClickLoc connector. AutoDCSTech stocks this model and can assist with lifecycle status and availability. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Troubleshooting & Common Issues
If readings are erratic, check the cable for continuity and ensure the connector is fully seated. Verify the gap voltage is within the linear range (0.25 to 2.3 mm from target). For high-frequency signal rolloff with long cable runs, refer to the frequency response graphs in the manual.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-04-05-02-CN |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
