Technical Specifications Breakdown
Key parameters for the 330103-00-05-10-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| Unthreaded Length Option | 00 = 00 mm |
| Overall Case Length Option | 05 = 05 mm |
| Total Length Option | 10 = 1.0 meter (3.3 feet) |
| Connector and Cable-Type Option | 02 = Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | 05 = CSA, ATEX, IECEx Approvals |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc) |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Relative Humidity | Less than 3% change in ASF at 93% humidity per IEC 68-2-3 for up to 56 days |
Industry Applications
Its 2 mm linear range and -9 Vdc recommended gap setting ensure accurate radial vibration measurements, helping maintenance teams detect early bearing wear or imbalance. The CSA, ATEX, and IECEx approvals make it suitable for hazardous areas, including gas and oil refineries.
Installation & Setup Guidance
For reliable operation, mount the probe with M10 x 1 thread engagement up to 15 mm maximum. Use 3-conductor shielded triad cable with tinned field wiring, up to 305 meters (1,000 feet) between the proximitor and monitor. Ensure the target surface is clean and within the linear range (0.25 to 2.3 mm). Always verify the gap voltage at -9 Vdc for radial vibration applications.
Maintenance & Reliability
Inspect the probe cable and connector periodically for signs of wear or corrosion. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The PPS tip and stainless steel case resist chemical exposure, but routine checks in high-humidity environments (up to 93%) are recommended to maintain accuracy.
Reliable Vibration Monitoring with the Bently Nevada 330103-00-05-10-02-05
This 3300 XL 8 mm proximity probe is designed for harsh industrial environments, offering robust performance and long-term reliability. Its M10 x 1 thread and unarmored construction simplify installation in standard mounting holes, reducing downtime during retrofits or new builds.
Compatibility & Integration
The 330103-00-05-10-02-05 works with Bently Nevada 3300 XL proximitor sensors and monitoring systems. When installed with intrinsically safe zener barriers per drawing 141092 or with galvanic isolators, it meets Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga requirements. For non-incendive circuits, use drawing 140979.
Selection Guide & Purchasing Advice
When ordering, confirm the total length (1.0 meter) and connector type (ClickLoc) match your installation. Contact our team for lifecycle status and availability before ordering.
Troubleshooting & Common Issues
If readings drift or become erratic, first check the cable continuity and connector integrity. Verify the gap voltage is within the linear range and the target surface is not damaged. For high-frequency signal rolloff, refer to frequency response graphs (Figures 10 and 12) when using longer field wiring lengths.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-05-10-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
