DS200FSAAG2ABA GE Field Supply Amplifier Board for Drive Control

Technical Specifications Breakdown

Key parameters for the DS200FSAAG2ABA are listed below for quick reference:

Industry Applications and Cost-Benefit Analysis

In steel mills, paper plants, and other heavy industries, precise field current control is critical for motor speed and torque regulation. The DS200FSAAG2ABA enables reliable signal amplification within the external field exciter module, reducing downtime caused by faulty gate drive signals. By using this genuine GE board, operators avoid costly miswiring or component mismatches that can lead to SCR bridge failures. The compact 52 mm x 62 mm footprint allows easy retrofit into existing Mark V cabinets without major rework.

Installation and Setup Guidance

When installing the DS200FSAAG2ABA, ensure the drive system is de-energized and locked out. Mount the board securely in the designated slot within the external field exciter module. Verify that the 10-pin terminal connector aligns correctly with the mating harness. Check the two onboard fuses for continuity before power-up. Refer to manual GEH-6005 for proper jumper configuration to match the specific drive frame size (G, C, CX, J, K, L, or M).

Maintenance and Reliability Tips

Operating the DS200FSAAG2ABA within its rated 0 to 50° C range ensures long service life. Periodically inspect the board for dust accumulation, loose connectors, or signs of overheating on the transistors and integrated circuits. The metal-oxide varistor (MOV) voltage suppressors on the external field exciter module should also be checked for degradation. Keep the cooling fan (if present in the FEAN module) unobstructed to maintain airflow.

Field Supply Amplifier Board for Reliable Drive Control

The DS200FSAAG2ABA is a Field Supply Gate Amplifier Board manufactured by General Electric as part of the Mark V Series used in GE Drive Control systems. This component is essential for amplifying control signals to regulate field current in thyristor-based power conversion bridges, ensuring stable motor operation in demanding industrial environments.

Compatibility and Integration

The DS200FSAAG2ABA is designed for GE Mark V Drive Control systems. It interfaces directly with the SDCI or DCFB board, which decodes field firing signals from the SDCC card. The board works with both internal (SDCIG1) and external field exciter modules, supporting a wide range of drive frame sizes. Its 10-pin connector and test points facilitate easy signal monitoring during commissioning.

Selection Guide and Purchasing Advice

When sourcing a replacement DS200FSAAG2ABA, verify the revision level matches your existing board. AutoDCSTech stocks this genuine GE part with fast shipping from US inventory. Please verify current lifecycle status and availability with AutoDCSTech before ordering. Our team can help confirm compatibility with your specific drive frame and application.