Evaluating the Allen-Bradley 20F1AND186JN0NNNNN PowerFlex 753 AC Drive
When selecting an AC drive for demanding industrial motor control, the Allen-Bradley 20F1AND186JN0NNNNN offers a balance of power and flexibility. This unit is part of the PowerFlex 753 series, engineered for applications requiring precise speed and torque management. It provides dual horsepower ratings to match varying load profiles.
Technical Specifications Breakdown
Key parameters for the 20F1AND186JN0NNNNN are listed below for quick reference:
| Feature | Specification |
|---|---|
| Rated Voltage | 480V AC / 650V DC |
| Number of Phases | 3-Phase |
| Rated Frequency | 60 Hz |
| Normal Duty Horsepower | 150 hp |
| Normal Duty Output Current | 186 A |
| Heavy Duty Horsepower | 125 hp |
| Heavy Duty Output Current | 156 A |
| Protection Category | IP00 |
| Frame Size | Frame 6 |
| Operating Temperature Range | 0 to 40°C |
| Maximum Operating Humidity | 80% (non-condensing) |
| Maximum Operating Altitude | 1000 meters above sea level |
Industry Applications
This drive suits industries like material handling, pumping, and fan control. For a conveyor system requiring 150 HP at 186 A, the normal duty rating handles continuous operation. In a crusher or mixer with shock loads, the 125 HP heavy duty rating provides extra torque margin. The 3-phase 480V AC input aligns with common North American industrial power.
Installation & Setup Guidance
Mount the drive in a clean, dry location within the 0 to 40°C range. Because the protection category is IP00, install it inside an enclosure that meets local codes. Ensure the ambient humidity stays below 80% non-condensing and altitude does not exceed 1000 meters. Use appropriately sized copper conductors for 186 A continuous current. Follow the PowerFlex 753 manual for proper grounding and shielding.
Maintenance & Reliability
Periodically inspect the cooling fan and air filters for dust buildup. Verify that the ambient temperature remains within the 0 to 40°C range. Check all power connections for tightness annually. The drive's filtered design with CM jumper installed helps reduce electrical noise, improving system reliability.
Selection Guide & Purchasing Advice
When choosing between normal and heavy duty ratings, match the motor's full load amps to the drive's output current. For a 150 HP motor at 186 A FLA, the normal duty rating is ideal. For a 125 HP motor with high starting torque, the heavy duty rating provides headroom. Contact AutoDCSTech to verify current lifecycle status and availability before ordering. Our team can help confirm the 20F1AND186JN0NNNNN meets your specific application requirements.
Availability & Condition at AutoDCSTech
| Part Number | 20F1AND186JN0NNNNN |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
