Bently Nevada 330101-00-96-10-02-05 3300 XL 8 mm Probe with CSA, ATEX, IECEx

Product Overview

For maintenance engineers seeking a robust vibration monitoring solution, the Bently Nevada 330101-00-96-10-02-05 offers a proven design for critical rotating machinery. This 3300 XL 8 mm probe features a 3/8-24 UNF thread and is built without armor, making it suitable for standard mounting applications. Its patented TipLoc molding method ensures a durable bond between the probe tip and body, while the CableLoc design provides 330 N (75 lbf) pull strength for secure cable attachment. The 330101-00-96-10-02-05 is engineered to withstand harsh industrial environments, reducing unplanned downtime and maintenance costs.

Technical Specifications Breakdown

Key parameters for the 330101-00-96-10-02-05 are listed below for quick reference:

Industry Applications

The 330101-00-96-10-02-05 is designed for radial vibration and position monitoring in turbomachinery, compressors, pumps, and motors. Its 2 mm linear range and high sensitivity (7.87 V/mm) enable precise measurement of shaft displacement, helping engineers detect early signs of bearing wear or imbalance. The probe's robust stainless steel case and PPS tip resist damage in high-vibration environments, reducing replacement frequency and total cost of ownership.

Installation & Setup Guidance

When installing the 330101-00-96-10-02-05, ensure the probe case thread engagement does not exceed 0.563 in. Use the recommended torque values: 11.2 N•m (100 in•lbf) for standard forward mounted probes, and 7.5 N•m (66 in•lbf) for the first three threads. Field wiring should use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable, with a maximum length of 305 meters (1,000 feet) between the Proximitor sensor and monitor. The recommended gap setting for radial vibration is -9 Vdc (approximately 1.27 mm or 50 mils).

Maintenance & Reliability

To maintain measurement accuracy, inspect the probe tip and cable periodically for physical damage. The probe's FluidLoc cable option (if ordered) prevents oil leakage through the cable interior, simplifying maintenance in lubricated environments. Exposing the probe to temperatures below -34°C (-30°F) may cause premature failure of the pressure seal, so avoid such conditions. The probe is designed to seal differential pressure between tip and case using a Viton® O-ring; contact the custom design department if pressure testing is required.

Compatibility & Integration

The 330101-00-96-10-02-05 is compatible with Bently Nevada 3300 XL Proximitor sensors and monitoring systems. Its miniature coaxial ClickLoc connector ensures a secure, quick connection. The probe's standard 1.0 m cable length suits many installations, and extension cables with similar specifications can be added. For optimal performance, use the recommended field wiring and observe the frequency response graphs for signal rolloff at high frequencies with longer cable runs.

Selection Guide & Purchasing Advice

When selecting a replacement or new probe, verify that the 330101-00-96-10-02-05 matches your required thread size (3/8-24 UNF) and agency approvals (CSA, ATEX, IECEx). Please verify current lifecycle status and availability with AutoDCSTech before ordering. AutoDCSTech stocks genuine Bently Nevada components to ensure reliability and compliance with safety standards.