Product Overview
The Bently Nevada 330101-01-13-05-01-00 is a 3300 XL 8 mm probe with a 3/8-24 UNF thread, designed without armor for applications where ruggedness and precise vibration measurement are critical. This probe is part of the 3300 XL series, known for its patented TipLoc and CableLoc technologies that enhance durability and pull strength up to 330 N (75 lbf).
Technical Specifications Breakdown
Key parameters for the 330101-01-13-05-01-00 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length Option | 01 - 0.1 in |
| Overall Case Length Option | 13 - 1.3 in |
| Total Length Option | 05 0.5 meter (1.6 feet) |
| Connector and Cable-Type Option | 01 - Miniature coaxial ClickLoc connector with connector protector, standard cable |
| Nominal Probe DC Resistance (0.5 m) | 7.45 ± 0.50 Ω |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Incremental Scale Factor (ISF) - Standard 5 or 1 meter System | 7.87 V/mm (200 mV/mil) ± 5% |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
Industry Applications
The 3/8-24 UNF thread allows easy installation in standard mounting holes, reducing downtime. Its robust PPS tip and stainless steel case withstand oil, moisture, and temperature extremes, making it suitable for petrochemical and power generation environments.
Installation & Setup Guidance
When installing the 330101-01-13-05-01-00, ensure the probe tip is clean and the mounting surface is free of debris. Use the recommended gap setting of -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration applications. Field wiring should use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable, with a maximum length of 305 meters (1,000 feet) between the Proximitor Sensor and monitor. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure.
Maintenance & Reliability
Inspect the probe cable and connector periodically for signs of wear or damage. The patented CableLoc design provides 330 N (75 lbf) pull strength, but avoid sharp bends or kinks. The probe is designed to seal differential pressure via a Viton O-ring; contact AutoDCSTech if pressure testing is required. Operate within the standard temperature range of -52°C to +177°C to maintain accuracy. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Compatibility & Integration
This probe is compatible with Bently Nevada 3300 XL extension cables and Proximitor sensors. The miniature coaxial ClickLoc connector ensures secure, quick connections. For extended temperature range applications, use the ETR probe variant (not this model). The system's incremental scale factor of 7.87 V/mm (200 mV/mil) ± 5% ensures interchangeability with other 3300 XL components.
Troubleshooting & Common Issues
If readings drift or become noisy, check the probe tip for contamination or damage. Verify the DC resistance at the probe connector (7.45 ± 0.50 Ω for 0.5 m length). Ensure field wiring does not exceed 305 meters to avoid signal roll-off. If the pressure seal fails, contact AutoDCSTech for replacement options.
Availability & Condition at AutoDCSTech
| Part Number | 330101-01-13-05-01-00 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
