Bently Nevada 330101-01-13-05-01-05 3300 XL 8 mm Probe, 3/8-24 UNF Thread, Without Armor

Product Overview

The Bently Nevada 330101-01-13-05-01-05 is a 3300 XL 8 mm probe with 3/8-24 UNF thread, without armor. This eddy-current probe is designed for precise vibration and position measurements in critical rotating machinery such as turbines, compressors, and pumps. Its robust construction and advanced features ensure reliable performance in demanding industrial environments.

Technical Specifications Breakdown

Key parameters for the 330101-01-13-05-01-05 are listed below for quick reference:

Industry Applications

The 330101-01-13-05-01-05 provides accurate, real-time data to help prevent unplanned downtime and extend equipment life. Its ATEX and IECEx approvals make it suitable for hazardous area installations.

Installation & Setup Guidance

When installing the 330101-01-13-05-01-05, ensure the probe tip is properly positioned within the linear range (0.25 to 2.3 mm from target). Use the recommended gap setting of -9 Vdc (approximately 1.27 mm) for radial vibration measurements. Secure the probe using the 3/8-24 UNF thread and connect the miniature coaxial ClickLoc connector to the extension cable. Field wiring should use 3-conductor shielded triad cable with a maximum length of 305 meters between the Proximitor sensor and the monitor.

Maintenance & Reliability

The probe's patented TipLoc and CableLoc designs provide enhanced mechanical strength and reliability. The PPS probe tip and stainless steel case resist harsh environments. For extended temperature range applications, the probe can operate up to 218°C at the tip. Regularly inspect the probe and cable for physical damage, and verify the pressure seal integrity if used in pressurized environments.

Compatibility & Integration

The 330101-01-13-05-01-05 is part of the 3300 XL series and is compatible with Bently Nevada 3300 XL Proximitor sensors and monitoring systems. The standard 5 or 1 meter system offers an incremental scale factor of 7.87 V/mm with ±5% interchangeability error. The probe is available with CSA, ATEX, and IECEx approvals for global use.

Selection Guide & Purchasing Advice

When selecting the 330101-01-13-05-01-05, consider the required cable length, environmental conditions, and approval requirements. For longer cables or extended temperature ranges, other options are available. Contact AutoDCSTech for availability and lifecycle status before ordering.