Technical Specifications Breakdown
Key parameters for the 330102-00-30-10-02-00 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | 3/8-24 UNF with armor |
| Unthreaded Length | 0.0 in |
| Overall Case Length | 3.0 in |
| Total Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc connector, standard cable |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Nominal DC Resistance (1.0 m) | 7.59 ± 0.50 Ω |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approx. 1.27 mm (50 mils)] |
| Operating Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Weight | 323 g/m (11.4 oz) |
Industry Applications
Its 2 mm linear range and -9 Vdc recommended gap setting enable precise radial vibration measurements. The 330102-00-30-10-02-00 is commonly deployed in oil and gas, power generation, and petrochemical facilities where early fault detection is critical to avoid unplanned downtime.
Installation & Setup Guidance
When installing the 330102-00-30-10-02-00, ensure the probe is mounted with the 3/8-24 UNF thread engaging no more than 0.563 in. Field wiring should use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable, with a maximum length of 305 meters (1,000 feet) between the Proximitor Sensor and the monitor. For optimal signal integrity, refer to the frequency response graphs for high-frequency roll-off when using longer cable runs.
Maintenance & Reliability
Inspect the probe and cable periodically for physical damage or contamination. The probe is designed to seal differential pressure via a Viton® O-ring, but it is not pressure tested prior to shipment. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The probe’s PPS tip and stainless steel case resist corrosion in humid environments (less than 3% ASF change at 93% humidity per IEC 68-2-3).
Precision Vibration Monitoring with the Bently Nevada 330102-00-30-10-02-00
The Bently Nevada 330102-00-30-10-02-00 is a 3300 XL 8 mm Proximity Probe engineered for accurate, non-contact displacement measurements in rotating machinery. This model features a 3/8-24 UNF thread with armor, a 1.0 meter (3.3 feet) standard cable, and a miniature coaxial ClickLoc connector for secure field wiring. The probe tip is made of Polyphenylene sulfide (PPS) for durability, while the case is constructed from AISI 303 or 304 stainless steel (SST), ensuring long service life in harsh industrial environments.
Compatibility & Integration
For intrinsically safe installations, use zener barriers per drawing 141092 or galvanic isolators to meet Class I, Zone 0 requirements. For non-incendive circuits, follow drawing 140979 for Class I, Zone 2 compliance. Always verify the temperature classification (T1–T5) based on ambient conditions.
Selection Guide & Purchasing Advice
When selecting a replacement or new probe, confirm the total length, thread type, and connector option. AutoDCSTech stocks this exact model and can assist with lifecycle status and availability. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330102-00-30-10-02-00 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
