Bently Nevada 330103-00-03-10-01-05 3300 XL 8 mm Proximity Probe, Metric

Product Overview

For engineers tasked with reliable rotating machinery vibration monitoring, the Bently Nevada 330103-00-03-10-01-05 offers a proven solution. This 3300 XL 8 mm proximity probe, metric version, delivers accurate displacement measurements in demanding environments. Its robust design and agency approvals make it a trusted choice for critical asset protection.

Technical Specifications Breakdown

Key parameters for the 330103-00-03-10-01-05 are listed below for quick reference:

Industry Applications

The 2 mm linear range (0.25 to 2.3 mm from target) suits typical radial vibration monitoring. With CSA, ATEX, and IECEx approvals, it is suitable for hazardous areas when installed with intrinsic safety barriers or galvanic isolators per drawing 141092.

Installation & Setup Guidance

Mount the probe using the M10x1 thread with a maximum thread engagement of 15 mm. For field wiring, use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable with tinned ends. The maximum cable length between the Proximitor Sensor and monitor is 305 meters (1,000 feet). Set the recommended gap for radial vibration to -9 Vdc, approximately 1.27 mm (50 mils).

Maintenance & Reliability

The probe case is AISI 303/304 stainless steel, and the tip is PPS, offering corrosion resistance. Operating temperature range is -52°C to +177°C for standard probes. Exposing the probe below -34°C (-30°F) may cause premature pressure seal failure. The probe is not pressure tested before shipment; contact the custom design department if pressure seal testing is required.

Compatibility & Integration

This probe is part of the 3300 XL system and works with compatible Proximitor sensors and monitors. For intrinsically safe installations, use zener barriers per drawing 141092 or galvanic isolators. For non-incendive circuits, connect per drawing 140979.

Selection Guide & Purchasing Advice

When selecting a replacement or new probe, verify the total length, thread, and approvals match your application. The 330103-00-03-10-01-05 is available from AutoDCSTech. Please verify current lifecycle status and availability with AutoDCSTech before ordering.