Technical Specifications Breakdown
Key parameters for the 330103-00-03-50-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe, Metric |
| Unthreaded Length | 0 mm |
| Overall Case Length | 30 mm |
| Total Length | 5.0 meters (16.4 feet) |
| Connector Type | Miniature ClickLoc coaxial connector |
| Agency Approvals | CSA, ATEX, IECEx |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Case Thread | M10x1 |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Weight | 323 g/m (11.4 oz) |
Industry Applications: Reducing Operational Costs
By providing accurate radial vibration and thrust position data, it enables predictive maintenance that avoids expensive emergency repairs. The 5.0-meter cable length is specifically designed for use with the 5 meter Proximitor sensor, ensuring signal integrity and reducing installation complexity.
Installation & Setup Guidance
For optimal performance, mount the probe with the recommended gap setting of -9 Vdc (approximately 1.27 mm). Use 3-conductor shielded triad cable with tinned field wiring (0.2 to 1.5 mm²). Maximum field wiring length between the Proximitor sensor and monitor is 305 meters (1,000 feet). Ensure the probe tip is clean and the target surface is smooth and grounded.
Maintenance & Reliability
The stainless steel case and PPS tip resist corrosion and wear. The probe is designed to seal differential pressure between tip and case using a Viton O-ring. Exposing the probe to temperatures below -34°C (-30°F) may cause premature pressure seal failure. Inspect the probe and cable periodically for physical damage.
Cost-Efficient Vibration Monitoring with the Bently Nevada 330103-00-03-50-02-05
Investing in reliable machinery protection directly reduces unplanned downtime and maintenance costs. The Bently Nevada 330103-00-03-50-02-05 3300 XL 8 mm proximity probe delivers precise shaft vibration and position measurements, helping you avoid catastrophic failures. This metric probe is engineered for long service life in demanding environments, lowering your total cost of ownership.
Compatibility & Integration
This probe is compatible with Bently Nevada 3300 XL Proximitor sensors (5 meter version). It supports intrinsically safe installations when used with approved zener barriers or galvanic isolators per drawing 141092 (Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga). For non-incendive circuits, use drawing 140979 (Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc).
Selection Guide & Purchasing Advice
When selecting a proximity probe, match the cable length and connector type to your existing system. Contact AutoDCSTech for lifecycle status and availability before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-03-50-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
