FANUC A06B-6058-H005 Servo Amplifier – 3.08 kW, PWM Interface

Technical Specifications Breakdown

Let's examine the key parameters that define the A06B-6058-H005's capabilities. Each specification directly impacts real-world performance.

Power Rating: 3.08 kW

This power output suits medium-duty servo applications. It provides enough torque and speed for CNC spindles, robot joints, and conveyor drives without excessive energy consumption.

PWM Interface Support

This interface enables precise speed and position control, critical for high-accuracy tasks.

Open Frame Design

The open frame construction promotes natural airflow for cooling. It also simplifies maintenance access, allowing technicians to inspect components quickly.

Operating Temperature: 0 to 40 Degrees Celsius

This range covers typical factory floor conditions. The amplifier maintains stable operation within this thermal envelope, ensuring consistent performance.

Maximum Vibration: 5G

With a 5G vibration rating, the unit withstands shocks from moving machinery. This robustness reduces the risk of loosening connections or component fatigue.

Maximum Altitude: 1000 Meters Above Sea Level

The altitude rating ensures reliable operation at most industrial sites. It accounts for reduced air density without derating.

Industry Applications

• CNC Applications: Use it to drive servo motors on milling machines, lathes, and routers. The 3.08 kW power and PWM interface deliver smooth, accurate cuts.
• Robotics Applications: Power robot arms and gantry systems. The amplifier's vibration tolerance (5G) maintains precision during rapid movements.
• Material Handling Applications: Control conveyors, sorters, and pick-and-place units. The open frame design aids heat dissipation in continuous-duty cycles.

Installation & Setup Guidance

Follow these practical tips for successful integration:

• Mount the amplifier in a clean, dry location within the 0 to 40 degrees Celsius temperature range.
• Ensure adequate clearance around the open frame for airflow. Do not block ventilation paths.
• Connect PWM signal lines according to the controller's wiring diagram. Use shielded cables to minimize electrical noise.
• Verify that the power supply matches the amplifier's requirements. Refer to the product manual for specific input voltage details.
• Secure the unit to withstand up to 5G vibration. Use appropriate mounting hardware and check tightness periodically.

Maintenance & Reliability

To maximize service life, perform these routine checks:

• Inspect the open frame for dust accumulation every six months. Clean with low-pressure dry air if needed.
• Verify that ambient temperature stays within 0 to 40 degrees Celsius. Use external cooling if necessary.
• Check all electrical connections for signs of corrosion or looseness. Tighten as required.
• Monitor for unusual noise or vibration during operation. Address any changes promptly.

What Is the FANUC A06B-6058-H005 Servo Amplifier?

Part of the A06B product line, this servo amplifier delivers a power rating of 3.08 kW and supports PWM interfaces. Engineers use it in CNC machinery, robotic systems, and material handling equipment to achieve accurate, responsive motion control.

Selection Guide & Purchasing Advice

Before ordering the A06B-6058-H005, confirm these points:

• Your controller supports PWM interface communication.
• The application's power demand does not exceed 3.08 kW.
• Operating altitude is below 1000 meters above sea level.
• Ambient temperature remains within 0 to 40 degrees Celsius.

AutoDCSTech stocks this servo amplifier and can assist with availability inquiries. Contact our team to verify current stock and lead times.