Allen-Bradley 2094-BC07-M05-S Integrated Axis Module for Kinetix 6000

Technical Specifications Breakdown

Key parameters for the 2094-BC07-M05-S are listed below for quick reference:

Industry Applications

High-Speed Packaging Lines

In packaging, the 2094-BC07-M05-S provides the continuous power needed for synchronized film feeding, sealing, and cutting stations. The 97% efficiency reduces heat load in control cabinets, extending component life.

Precision Material Handling

For conveyor systems requiring precise indexing, this module’s 45 kW continuous power output supports rapid acceleration and deceleration of heavy loads without voltage sag.

Machine Tool Spindle Control

In CNC machining, the integrated axis module delivers stable DC bus voltage (458…747V DC) to servo drives, ensuring consistent torque at varying speeds.

Installation & Setup Guidance

Mount the 2094-BC07-M05-S on the leftmost side of the Kinetix 6000 power rail. Ensure the AC input voltage is within 324…528V rms three-phase (360…480V nom) and frequency is 47…63 Hz. For control power, use a single-phase supply of 95…264V rms (110…240V rms nom). The recommended control input power fuse is Bussmann FNQ-R-10 (10 A) or FNQ-R-7.5 (7.5 A). For DC bus protection, use Bussmann FWJ-125A or Mersen A70QS125-4 fuses. Verify that the continuous control power current does not exceed 3.0 A when using the FNQ-R-7.5 fuse.

Maintenance & Reliability

Inspect the module’s cooling fan and air filters quarterly to prevent dust buildup. Operating temperature range is 0-50 °C (32-122 °F). Ensure ambient temperature stays within this range for reliable operation. The internal shunt resistor (28.75 Ohms) handles regenerative energy; verify shunt health during preventive maintenance.

Solving High-Demand Multi-Axis Motion Control Challenges

In modern manufacturing, coordinating multiple servo axes under tight cycle times while maintaining precision is a constant engineering challenge. The Allen-Bradley 2094-BC07-M05-S Integrated Axis Module directly addresses this need by providing a robust, high-power interface between the drive and motor in a Kinetix 6000 system. This module delivers 45 kW of continuous power to the bus, enabling smooth operation of demanding loads without sacrificing responsiveness.

Compatibility & Integration

This module is part of the Kinetix 6000 series and integrates with compatible Allen-Bradley servo drives and motors. It supports Safe Torque-off for emergency stop functionality. The module is available in Series A (standard overload) and Series B (peak enhanced). Standard mode is default; activate peak enhanced mode for increased peak current performance.

Selection Guide & Purchasing Advice

When selecting the 2094-BC07-M05-S, confirm your system voltage and power requirements match the 45 kW continuous output and 360-480V AC input. For peak current needs, choose Series B for 300% peak converter current. Contact AutoDCSTech for current lifecycle status and availability before ordering.