Bently Nevada 330101-01-13-05-01-CN 3300 XL 8 mm Probe, 3/8-24 UNF Thread

Product Overview

The Bently Nevada 330101-01-13-05-01-CN is a 3300 XL 8 mm probe with a 3/8-24 UNF thread, designed without armor. It includes a miniature coaxial ClickLoc connector with connector protector and standard cable. The probe features a patented TipLoc molding method for a robust bond between tip and body, and a CableLoc design providing 330 N (75 lbf) pull strength. Made in the U.S.A., it is suitable for radial vibration and position monitoring in turbomachinery, compressors, and pumps.

Technical Specifications Breakdown

Key parameters for the 330101-01-13-05-01-CN are listed below for quick reference:

Industry Applications

Its 2 mm linear range and 7.87 V/mm sensitivity enable precise radial vibration and thrust position monitoring. The rugged PPS tip and stainless steel case resist oil, moisture, and physical abuse, reducing unplanned downtime.

Installation & Setup Guidance

Mount the probe using the 3/8-24 UNF thread into a drilled and tapped hole per manufacturer guidelines. Ensure the target surface is clean and within the recommended gap setting of -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration. Use 3 conductor shielded triad cable for field wiring, with a maximum length of 305 meters (1,000 feet) between the Proximitor Sensor and monitor. Verify the connector is securely fastened to avoid signal loss.

Maintenance & Reliability

Inspect the probe tip and cable periodically for signs of wear, especially in high-vibration or high-temperature environments. The probe operates reliably from -52°C to +177°C (-62°F to +350°F) for standard range. Avoid exposing the probe to temperatures below –34˚C (-30˚F) to prevent premature pressure seal failure. The Viton® O-ring seals differential pressure; contact the custom design department if pressure testing is required.

Compatibility & Integration

The 330101-01-13-05-01-CN is designed for use with Bently Nevada 3300 XL Proximitor Sensors and monitoring systems. It is compatible with standard 5 or 1 meter system configurations. The miniature coaxial ClickLoc connector ensures reliable signal transmission. For extended temperature range applications, verify probe and cable ratings.

Selection Guide & Purchasing Advice

When selecting a probe, consider the required cable length, thread type, and environmental conditions. The 330101-01-13-05-01-CN is a proven choice for general-purpose vibration monitoring. Contact AutoDCSTech to confirm availability and lifecycle status before ordering. Our team can assist with cross-referencing and alternative options if needed.