Technical Specifications Breakdown
Key parameters for the 330102-00-32-10-01-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | 3/8-24 UNF, with armor |
| Unthreaded Length Option | 00 = 0 in |
| Overall Case Length Option | 32 = 3.2 in |
| Total Length Option | 10 = 1.0 meter (3.3 feet) |
| Connector and Cable-Type Option | 01: Miniature coaxial ClickLoc connector with connector protector, standard cable |
| Agency Approval Option | 05: CSA, ATEX, IECEx Approvals |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) from target |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Weight | 323 g/m (11.4 oz) |
| Nominal Probe DC Resistance (1.0 m length) | 7.59 ± 0.50 Ω |
Industrial Applications
Its 2 mm linear range and -9 Vdc recommended gap setting ensure consistent, repeatable readings across a wide temperature span. The stainless steel case and PPS tip withstand oil, moisture, and many process chemicals.
Installation & Setup Guidance
Mount the probe using the 3/8-24 UNF thread with a maximum thread engagement of 0.563 in. Use 3-conductor shielded triad cable (0.2 to 1.5 mm² / 16 to 24 AWG) for field wiring. Maximum field wiring length between the Proximitor sensor and monitor is 305 meters (1,000 feet). For radial vibration applications, set the initial gap to -9 Vdc (approximately 1.27 mm / 50 mils).
Maintenance & Reliability
Inspect the probe cable and connector periodically for wear or damage. Avoid exposing the probe to temperatures below -34°C (-30°F) as this may cause premature pressure seal failure. The probe is designed to seal differential pressure between tip and case using a Viton® O-ring; contact Bently Nevada if pressure testing is required.
Precision Vibration Monitoring for Critical Machinery
When uptime and safety are non-negotiable, the Bently Nevada 330102-00-32-10-01-05 3300 XL 8 mm Proximity Probe delivers the reliable, high-integrity data your predictive maintenance program demands. Designed for permanent installation on rotating assets such as turbines, compressors, and pumps, this probe provides accurate shaft displacement and vibration measurements even in harsh environments.
Compatibility & Integration
This 1.0-meter probe is intended for use with the 5-meter Proximitor sensor only.
Selection Guide & Purchasing Advice
When selecting a replacement or new probe, verify the required cable length and agency approvals match your site requirements. The 330102-00-32-10-01-05 is a standard-length option with full hazardous area certifications. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330102-00-32-10-01-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
