Technical Specifications Breakdown
Key parameters for the 330102-10-45-10-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Unthreaded Length Option | 1 in (10) |
| Overall Case Length Option | 4.5 in (45) |
| Total Length Option | 1.0 meter (3.3 feet) |
| Connector and Cable-Type | Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | CSA, ATEX, IECEx Approvals |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Case Thread | 3/8-24 UNF |
| Linear Range | 2 mm (80 mils) from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
Industry Applications for the 3300 XL Probe
Its 2 mm linear range and -9 Vdc recommended gap setting ensure accurate radial vibration and position measurements. The PPS tip resists chemical attack, while the stainless steel case withstands high-pressure environments. With CSA, ATEX, and IECEx approvals, it is suitable for hazardous areas such as oil and gas refineries.
Installation & Setup Guidance
Mount the probe using the 3/8-24 UNF thread with a maximum thread engagement of 0.563 in. For field wiring, use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable with tinned ends. The maximum field wiring length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet). Ensure the probe tip is clean and the target surface is smooth for optimal linearity.
Maintenance & Reliability
Inspect the probe cable and connector periodically for wear or damage. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature failure of the pressure seal. The probe is designed to seal differential pressure between tip and case using a Viton O-ring. For applications requiring pressure seal testing, contact the custom design department.
Compatibility & Integration
The 330102-10-45-10-02-05 is designed for use with Bently Nevada 3300 XL Proximitor sensors. When installed with intrinsically safe zener barriers per drawing 141092 or with galvanic isolators, it meets Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga. For non-incendive circuits per drawing 140979, it meets Class I, Zone 2: AEx/Ex nA IIC T5...T1 Gc.
Selection Guide & Purchasing Advice
When selecting a proximity probe, verify the total length, thread type, and agency approvals match your application. The 330102-10-45-10-02-05 offers a 1.0 meter cable with ClickLoc connector for easy installation. AutoDCSTech stocks this model and can assist with lifecycle status and availability. Contact our team to confirm compatibility with your existing monitoring system.
Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330102-10-45-10-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
