Schneider 170MCI02110 Modicon Momentum Communication Cable 2m

Product Overview

The 170MCI02110 is a dedicated communication cable from Schneider Electric, part of the well-established Modicon Momentum product line. Its primary function is to establish a secure and shielded link between Momentum I/O bases, enabling reliable data transfer in distributed control systems. This cable is engineered to maintain signal integrity in electrically noisy industrial settings, making it a critical component for system integrators and maintenance teams alike.

Technical Specifications Breakdown

Key parameters for the 170MCI02110 are listed below for quick reference:

Industry Applications

Typical use cases include:

• Manufacturing Assembly Lines: Connecting Momentum I/O bases that monitor sensors and control actuators on automated assembly stations. The 2-meter length provides flexibility for routing within control panels.
• Process Control Skids: In chemical or pharmaceutical plants, where signal integrity is critical, the foil and drain shielding minimizes electromagnetic interference from nearby motors or drives.
• Material Handling Systems: For conveyor networks using distributed I/O, the robust PVC jacket withstands vibration and minor abrasion during installation.

Installation & Setup Guidance

When installing the 170MCI02110, ensure both connectors are fully seated and locked into the corresponding 20-pin ports on the Momentum I/O bases. Avoid sharp bends or kinks in the cable; the minimum bend radius for a round shielded cable of this gauge is typically around 4 times the outer diameter. Route the cable away from high-voltage power lines and variable frequency drive outputs to preserve signal quality. The operating temperature range of -10°C to +60°C allows use in most indoor industrial environments, but avoid direct exposure to liquids or corrosive chemicals.

Maintenance & Reliability

Periodic visual inspection of the cable and connectors is recommended as part of routine system maintenance. Check for signs of wear, cuts, or crushed areas on the PVC jacket. Ensure connector pins are clean and free of oxidation. The shielding effectiveness depends on proper termination at both ends; verify that the drain wire is connected to the ground reference at the I/O base. Given the cable's RoHS compliance, it meets environmental standards for disposal and recycling.

The Evolution of Industrial Connectivity

In the fast-paced world of industrial automation, reliable communication between control components is the backbone of efficient operations. As factories have evolved from hardwired relay systems to modular, distributed I/O architectures, the demand for robust, interference-resistant cabling has never been higher. The Schneider Electric Modicon Momentum series addresses this need with purpose-built connectivity solutions, and the 170MCI02110 communication cable stands as a prime example of engineering designed for real-world industrial environments.

Compatibility & Integration

The 170MCI02110 is designed exclusively for the Modicon Momentum series using the proprietary MODBUS/Momentum I/O interface. It connects Momentum I/O base to base, enabling communication between modules such as discrete I/O, analog I/O, and specialty modules. For systems using other Schneider Electric platforms (e.g., Modicon M340 or Quantum), verify compatibility with the specific I/O base connector type before ordering.

Selection Guide & Purchasing Advice

When selecting a replacement or spare cable for your Momentum system, confirm the part number 170MCI02110 matches your required length and connector configuration. AutoDCSTech stocks this genuine Schneider cable, ensuring original quality and fit. Please verify current lifecycle status and availability with AutoDCSTech before ordering to ensure timely delivery for your project.